X10 Module; Figure 69 Using Elk Conditions; Figure 70 Elk Actions - Universal Devices ISY-99i Series User Manual

Using your ELK resources in ISY Programs is a snap. For example, you could trigger an ISY
Program if a garage door sensor tied to your ELK was open:

Figure 69 Using ELK Conditions

You could also use an ISY Program to arm your ELK security system:

Figure 70 ELK Actions

3.9.6 X10 Module

This optional module provides cleaner management and better control over A10/X10
devices, allowing you to add them to the Admin Console's device tree just like INSTEON
devices.
Please note the following limitations:
This module uses simulated INSTEON addresses internally. Though unlikely, it could
potentially conflict with existing INSTEON devices in your ISY, stopping you from using
those particular INSTEON modules.
This module only allows for ON/OFF commands in the device tree. No support for
bright/dim.
Note that X10 devices cannot be added to INSTEON Scenes.
To add an A10/X10 device to your tree, click the Link Management pull-down menu and
choose New INSTEON/A10/X10 Device.
- 59 -