Program Actions; Figure 45 Fast On Condition; Figure 46 X10 Condition - Universal Devices ISY-99i Series User Manual

Figure 45 FAST ON Condition

Program conditions check to see whether or not other ISY Programs are currently True or
False.
X10 conditions trigger programs when X10 commands are received by the ISY. For
example, to run a program if an X10 M1 ON command is received:

Figure 46 X10 Condition

Variable conditions trigger programs based on the value of a defined variable. You can
read more about variables in the section titled Using Variables.
IR conditions trigger programs when IR commands are received from a remote control.
See the section titled 3.5 The Integrated IR Receiver for more information.
Module conditions trigger programs based on option ISY modules, such as the Electricity
meter module or the Climate module. See the section titled 3.9 Optional Modules for
more information.
Elk conditions trigger programs based on the state of available Elk resources, assuming you
have an Elk security system installed and communicating with your ISY, and have the
optional Elk Security System module installed. More information is available in the section
titled 3.9 Optional Modules.

3.3.6 Program Actions

In the Add To Program button section, click ACTION to add an Action to your Program.
Program Actions are commands that are run when the IF statement is true (a THEN action)
or if the IF statement is no longer true (an ELSE action). When adding an Action to your
program, be sure to click the ADD TO THEN or ADD TO ELSE button depending on your
intended result.
- 36 -