Download Print this page

Sharp MZ-80P4 Instruction Manual page 29

Dot printer
Hide thumbs

Advertisement

COPY/P 3
COPY/P
COPY/P 4
COPY/PN
PAGE/P
Outputs one-screen data accommodated in graphic
region 2 to the printer, and carries out bit image pattern
printing.
OR of the bits of the data accommodat'ed in graphic
regions I and 2 will be regarded as output data to the
printer. Therefore, the patterns obtained by COPY /P2
and COpy /P3 will be superposed for printing.
The value. specified by N shall be the maximum number
of lines to be printed on one page.
The number of lines here means the value for 1/6 inch
line feed. N shall be an integer selected from I through
72. In the initial stage, one page is allowed to contain 66
lines.
(Note I)
If
M
=
0 - 4, 7 - IS, or 22 - 31 in PRINTjP CHR$(M), it will be ignored.
(Note 2) M in CHR$(M) can be expressed in hexadecimal number. For example, since (32)'0
=
20H,
the indication shall be CHR$($20). $ in the parentheses in front of the hexadecimal
number indicates hexadecimal representation.
(Note 3) If NO PAPER takes place during the printing operation of the printer, ERROR in the
BASIC language will be NOT READY I ERR65 I in order to actuate the over function.
I ERR67 Iwill not be indicated.
26

Advertisement

loading