Table of Contents
Advertisement
ESC+(]3H)+
(HEX1) + ..... -+
(HEXn)+<OOH)
ESC+(]8H)+
<HEX1 )+(HEX, )
+<Data string)
.
,
ESC+(]4H)
ESC+06H)
ESC+(] 9H>+
(HEX)
• Sets horizontal tabulation.
• n value shall be 135 at maximum.
• n values may be transferred in no particular order.
• Tabulation setting shall be completed with the NULL code.
• The number of image data following (]B)+(] 8H) shall be transferred in 2
bytes: (HEX1)+(HEX,).
• The number of transferred bytes shall be expressed in 2-byte hexadecimal
number. (HEXl) shall represent lower 8-bit data whereas (HEX2) upper
8-bit data.
(Ex.) When the number of transferred bytes is 16 bytes .
(I BH)+<18H)+(l0H)+(Q0H)+(\ 6 byte data)
• Clears vertical tabulation setting.
• Clears horizontal tabulation setting.
• Sets the maximum number of characters printed on one line.
• Specifies the number of characters with (HEX) fonowing ESC+(] 9H).
• In the 160-character mode, 0
<
HEX
~
160
• In the I 36-character mode, 0
<
HEX
~
136
(Note I) When one page contains 66 lines, the tabulation value shall be up to 65.
(Note 2) Character codes shall be 20H
~
7EH. Character codes of 7FH and larger shall be ignored.
23
•
Advertisement
Table of Contents
