Returning a Call from the Caller ID Records
You can return calls by using the Caller ID recall feature.
If the number displayed is not correct, (needing 7, 10, 11 digits), do the following
before you dial:
7. Press L
8. Press P to dial the number displayed.
9. Press R to cancel dialing.
10.To end the call, press P, or place the handset
back in the base.
If you set up your home area code and local
area codes in the handset setup mode, you
will not have to adjust the number between
7, 10 or 11 digit dialing. (See handset
settings on page 22 for setup information).
1. Press H.
2. Use the L
3. Press P.
4. The display will show
Caller ID Key
5. Press P to dial out the displayed number.
6. To end the call, press P.
M to toggle among 7, 10, 11 digit numbers to be dialed out.
record you wish to call back.
to scroll to the call
When you are ready to dial
the number, press P. The
number displayed will dial out.