Download Print this page

Connect The Ethernet Cable; Connect The Power Adapter - D-Link DCS-1130 User Manual

Wireless n network camera
Hide thumbs


Table of Contents
Section 2 - Installation
Connect one end of the blue Ethernet cable included in your package to the Ethernet port on the back of the
DCS-1130 camera. Connect the other end of the cable to an available LAN port on your router or broadband
Connecting to a router
Attach the power adapter to the power jack located on the back of the DCS-1130 and
connect the power adapter to a power outlet. After connecting the power adapter, you
should see the status LED on the front of the camera turn on.
The status LED will light red when it receives power, will light green after the camera
connects to the network, and will flash green when the camera is being accessed.
D-Link DCS-1130 User Manual

Connect the Ethernet Cable

Connect the Power Adapter

Connecting to a broadband modem

Hide quick links:


Table of Contents

  Related Manuals for D-Link DCS-1130

This manual is also suitable for: