Setup > Snapshot - D-Link DCS-1130 User Manual

Wireless n network camera
Hide thumbs Also See for DCS-1130:
Table of Contents

Advertisement

Section 3 - Configuration
Setup > Snapshot
Here, you can set the camera to take snapshots when motion is detected.
Snapshots can be sent to an e-mail address and/or to an FTP server.
Enable Snapshot: Check this box to enable the snapshot feature.
Event Based (Motion Detection): This will set the camera to take a
snapshot whenever motion is detected.
Continuous (FTP only): This will set the camera to take snapshots
continuously at intervals specified in FTP Server > Interval below. You
can only save to an FTP server when taking continuous snapshots.
Scheduled (FTP only): This will set the camera to take snapshots
continuously at intervals specified in FTP Server > Interval below
according to schedule you define by checking days and entering the
times you want to record between. You can only save to an FTP server
when taking scheduled snapshots.
D-Link DCS-1130 User Manual
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs-1100lDcs-1130l

Table of Contents