D-Link DCS-1130 User Manual page 44

Appendix A - Installing the DCS-1130 on a Router Without UPnP
2) Assign an IP Address and Port for Your Camera
• Click on the SETUP tab, and select Network Setup
A local IP address is required to configure your camera and to view your
camera within your local network. You may use the default camera IP
address of 192.168.0.20. If you wish to use a different IP address, be
sure that the camera settings correspond to your network settings. The
Default Gateway will be the IP address of your router's local IP address
(e.g.192.168.0.1, if you are using a D-Link router).
D-Link DCS-1130 User Manual 40