Appendix A - Installing the DCS-1130 on a Router Without UPnP
The following steps generally apply to any router that you have on your network. The D-Link DIR-301 is used as an
example to clarify the configuration process.
Note: Because a dynamic WAN IP address can change from time to time depending on your ISP, you may want to
obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and
will be more convenient for you to use to access your camera from a remote location. You can also use DDNS to obtain
an IP address. Please refer to page 18 for more information.
D-Link DCS-1130 User Manual