Download Print this page

Appendix A: Installing The Dcs-1130 On A Router Without Upnp - D-Link DCS-1130 User Manual

Wireless n network camera
Hide thumbs

Advertisement

Table of Contents
Appendix A - Installing the DCS-1130 on a Router Without UPnP
Appendix A: Installing the DCS-1130 on a Router
If you connect your camera to an Internet router that does not support
UPnP, you can assign your camera to a DMZ connection on your router.
For more details, refer to your router's User Manual for more details on
configuring your camera to use a DMZ connection.
If you have multiple cameras you wish to connect, or if you do not want
to use DMZ, follow these steps to allow multiple remote access to your
cameras:
1) Identify your camera on the network
2) Assign a local IP address and port for your camera
3) Determine your router's WAN IP Address (Enable Remote
Viewing)
4) Open virtual server ports for your router (Enable Remote Viewing)
1) Identify Your Camera on the Network
• Log in to your camera's web interface from a computer on the same
local (home) network
• C l i c k o n t h e M A I N T E N A N C E t a b , a n d s e l e c t D e v i c e
Management
• Enter a unique Camera Name for your camera
Note: Giving your camera a unique name is important when setting
up multiple cameras on your network.
D-Link DCS-1130 User Manual
Without UPnP
39

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for D-Link DCS-1130

This manual is also suitable for:

Dcs-1100lDcs-1130l