Initializing Hdds - HIKVISION DS-7604NI-VP User Manual
Ds-7600ni series
Hide thumbs
Also See for DS-7604NI-VP:
- User manual (214 pages) ,
- Quick operation manual (59 pages) ,
- User manual (194 pages)
Table of Contents
Advertisement
User Manual of DS-7600NI Series NVR
10.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR.
Steps:
1. Enter the HDD Information interface.
Menu > HDD> General
2. Select HDD to be initialized.
3. Click the Init button.
4. Select the OK button to start initialization.
Figure 10. 1 HDD Information Interface
Figure 10. 2 Confirm Initialization
Figure 10. 3 Status changes to Formatting
138
Advertisement
Table of Contents
