Configuring Server And Http Ports; Configuring Email - HIKVISION DS-7604NI-VP User Manual

User Manual of DS-7600NI Series NVR
1. Enter the Network Settings menu
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings menu, as shown in Figure 9. 14.
3. Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you can
change it according to different requirements.
4. Click Apply button to save and exit the menu.

9.2.8 Configuring Server and HTTP Ports

Purpose:
You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and the
default HTTP port is 80.
Steps:
1. Enter the Network Settings interface.
Menu >
Configuration
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 9. 14.
3. Enter new Server Port and HTTP Port.
4. Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Port is
80, and you can change them according to different requirements.
5. Click Apply button to save and exit the interface.
Note: The Server Port should be set to the range of 2000-65535 and it is used for remote client software access.
The HTTP port is used for remote IE access.

9.2.9 Configuring Email

Purpose:
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
Figure 9. 17 RTSP Settings Interface
> Network
Figure 9. 18 Host/Others Settings Menu
129