Calling Patrols - HIKVISION DS-7604NI-VP User Manual

User Manual of DS-7600NI Series NVR
Repeat the above steps to add more key points.
Click the icon to delete the corresponding key point, and click the trash icon
points.
Select a key point, then click

4.2.4 Calling Patrols

Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Calling patrol in the PTZ setting interface:
Steps:
1. In the PTZ setting interface.
Menu> Camera> PTZ> More Settings
2. Select the patrol number, and then click
3. Click to stop it.
Calling patrol in live view mode:
Steps:
1. Press PTZ control on the front panel or on the remote, or click PTZ Control icon
toolbar, to show the PTZ control toolbar.
2. Choose Patrol on the control bar.
3. Double click the patrol or select the patrol and click
or button to adjust the order of the key points.
Figure 4. 8
Key Points Deletion
to call the patrol.
to call it.
49
to.delete all the key
on the quick setting