Configuring Motion Detection Record - HIKVISION DS-7604NI-VP User Manual

User Manual of DS-7600NI Series NVR

5.3 Configuring Motion Detection Record

Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes
place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger
certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center
and so on. In this chapter, you can follow the steps to schedule a record which triggered by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
2. Configure Motion Detection：
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection
for all the area shot by the camera, click Full Screen. To clear the motion detection area, click
Clear.
4) Click Handling, and the message box for channel information pop up.
Figure 5. 12 Motion Detection
Figure 5. 13 Motion Detection- Mask
60