User Manual of DS-7600NI Series NVR
8.1 Setting Motion Detection Alarm
Steps:
1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion
detection.
Menu> Camera> Motion
2. Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the sensitivity bar to
set sensitivity.
Click Handling button and set alarm response actions.
3. Click Trigger Channel tab and select one or more channels which will start to record or become full-screen
monitoring when motion alarm is triggered.
Figure 8. 2 Set Trigger Camera of Motion Detection
4. Set up arming schedule of the channel.
Figure 8. 1 Motion Detection Setup Interface
108