Table 2.1: Yellow Label Indicating Copper Stub Locations - Advantech ACP-4320 User Manual

Table 2.1: Yellow label indicating copper stub locations

NUT NUMBER
1 2 3 4 5
BP/MP MODEL
PCA-6113P4R
PCA-6114P7
PCA-6114P12
PCA-6114P4
PCA-6114P10
PCA-6113DP4
PCA-6114-B
PCA-6113P7X
PCA-6115
PCA-6114P12X
PCE-7B13-64
PCE-5B12-64
AIMB-740
AIMB-741
AIMB-742
AIMB-744
AIMB-750
AIMB-760
AIMB-762
AIMB-554
AIMB-560
Be careful to screw the Copper Stub under 10 kgf cm.
3. While installing a BACKPLANE, put it in place and then attach the supplied EMI
spring shielding onto it. Then fasten the screws provided. (see Figure 2.2),
4. For the PICMG 1.0 BACKPLANE, connect the orange-white wire from connec-
tor "HCN1" on the backplane to connector "CN21" on the CPU card.
5. While installing a MOTHERBOARD, attach the motherboard I/O shield onto the
rear plate first. Then fasten the motherboard onto the chassis. (see Figure 2.3)
6. Plug in the 20- pin (or 24-pin) ATX power connector and +12 V power connector
from the power supply to the backplane or motherboard.
7. Connect the wires for the POWER switch, RESET switch, and the front USB
from the front panel to the motherboard.
8. Connect the wires for the POWER LED, HDD LED and LAN LED from the moth-
erboard to the small LED board, which is attached to the front panel of the chas-
sis.
Note! AIMB-74X series motherboards don't support front LAN LED function.
6 7 8 9 10 11 12 13 14 15 16
7
17 18 19 20 21 22 23 24 25 26 27
ACP-4320 User Manual
28 29 X A M