Basic Operation - Sharp AY-AP9NRH Operation Manual

BASIC OPERATION

NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to the
room temperature when the unit is turned on.
DRY MODE
The fan speed is preset to AUTO and cannot be changed.
OM_AY-AP9NRH_EN.indd Sec1:5 OM_AY-AP9NRH_EN.indd Sec1:5
1
Press the MODE button to select the
operation mode.
AUTO
2
Press the ON/OFF button to start
operation.
• The red OPERATION lamp (
2
TO TURN OFF
3
Press the ON/OFF button again.
• The red OPERATION lamp (
1
4
3
Press the THERMOSTAT button to
set the desired temperature.
(AUTO/DRY mode)
The temperature can
be changed up to ±2 °C
the automatically set of
temperature.
(COOL/HEAT mode)
The temperature setting
range:
18-32°C.
4
Press the FAN button to set the
desired fan speed.
AUTO
EN-5
HEAT COOL DRY
) will light up.
) will turn off.
LOW MED HIGH
4/17/12 12:54:11 PM 4/17/12 12:54:11 PM