Figure 2: Diagram Of Gxw410X Display Panel; Table 2: Definitions Of The Gxw Display Panel - Grandstream Networks GXW410x User Manual

Power LED
Ready LED
LAN LED
PC LED
Video LED
LEDs 1 - 8
NOTE: All LEDs display green when ON. The Ready light will only be ON when the network interface is
ready and the Web User Interface is accessible.
During a firmware upgrade or configuration download the following LED pattern will be observed:
Power, Ready, Video and WAN LEDs will be ON. The FXO port LED will keep flashing during download
and then stay OFF while the new files are written. The entire process may take between 20 to 30 minutes.
The firmware upgrade is complete when you can login into the web configuration pages.
Grandstream Networks, Inc.
Firmware Version 1.4.1.5

FIGURE 2: DIAGRAM OF GXW410X DISPLAY PANEL

Display
LEDs

TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL

Indicates Power. Remains ON when Power is connected and unit is turned ON.
Remains ON after boot-up.
Indicates WAN port activity in the back side
Indicates LAN port activity in the back side
Remains solid green on boot-up. If Video IN terminal is connected, indicates video
activity.
Available in HW revision 1 Only
Indicate status of the respective FXO Ports on the back panel
Busy - ON
Available – OFF
GXW410x User Manual
GXW410x
FXO port
status
Page 7 of 32
Last Updated: 5/2014