Fujitsu fi-6140 Operator's Manual page 70

3.2 Scanning Books [fi-6240 only]
5. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver's setup dialog box, see Section
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of FUJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section
Scanned document images are displayed in the ScandAll PRO window.
9. When scanning ends, re-attach and gently close the document cover.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_02_01.htm (2/2) [2008/10/30 12:41:51]
ATTENTION
Do not move the document during scanning.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
"2.6 How to Use ScandAll PRO."
"2.6 How to Use ScandAll PRO."