Fujitsu fi-6140 Operator's Manual page 52

2.6 How to Use ScandAll PRO
fi-6140 / fi-6240 Image Scanner Operator's Guide
2.6 How to Use ScandAll PRO
ScandAll PRO is software for scanning images, which is in conformity with both TWAN/ISIS standards. Using the
FUJITSU TWAIN 32 or FUJITSU ISIS scanner driver together with ScandAll PRO allows you to create document images.
The following explains how to scan documents with the scanner through ScandAll PRO.
HINT
For information about the features of ScandAll PRO, refer to ScandAll PRO Help.
Launching ScandAll PRO
From the [Start] menu, select [All Programs]→[ScandAll PRO]→[ScandAll PRO].
ScandAll PRO starts up.
Selecting a Scanner Driver
ScandAll PRO supports both TWAIN and ISIS standards and allows you to invoke either the TWAIN driver or the ISIS
driver for scanning images with the scanner. This scanner comes with two drivers, FUJITSU TWAIN 32 Scanner Driver
and FUJITSU ISIS Scanner Driver, which you can use with this scanner.
The following explains how to select a scanner driver with ScandAll PRO (how to switch between the FUJITSU TWAIN
and ISIS scanner drivers).
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/02/c02_06_01.htm (1/14) [2008/10/30 12:41:47]
TROUBLESHOOTING
CONTENTS MAP
TOP