Fujitsu fi-6140 Operator's Manual page 93

3.9 Detecting Multifeeds
The following are how to detect multifeeds:
None
Check overlapping
Check length
Check overlapping and
length
For more information on multifeed detection, see Section
5. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
6. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, see Section
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_09_01.htm (2/2) [2008/10/30 12:42:05]
Multifeed detection is not performed.
The scanner monitors the thickness of fed documents. The scanner detects a
multifeed based on an increased thickness when multiple sheets are fed
simultaneously.
The scanner monitors the length of fed documents. The scanner detects a multifeed
based on an increased length when multiple sheets are fed simultaneously.
The scanner monitors both document thickness and length to detect multifeeds.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
"7.5 Multifeed Detection Conditions."
"2.6 How to Use ScandAll PRO."