Fujitsu fi-6140 Operator's Manual page 128

4.1 Cleaning Materials and Locations Requiring Cleaning
fi-6140 / fi-6240 Image Scanner Operator's Guide
4.1 Cleaning Materials and Locations Requiring Cleaning
Cleaning Materials
The table below shows the cleaning materials that are used on this scanner.
Cleaning Materials
Cleaner F1 (or isopropyl
alcohol)
Cleaning wipe
Soft, dry cloth
*1: For details on Cleaner F1, consult the agent where you bought your scanner or an authorized FUJITSU service provider.
*2: Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.
Locations and Cycle for Cleaning
Location
Brake roller
Pick roller
Feed roller
Plastic roller
Eject roller
Glass
Ultrasonic sensor
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/04/c04_01_01.htm (1/2) [2008/10/30 12:43:09]
Part No.
PA03950-0352
PA03950-0419
Commercially available.
HINT
It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the
scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off
the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the
cleaned parts.
Clean every 5,000 scanned sheets.
TROUBLESHOOTING
CONTENTS MAP
TOP
Remarks
1 bottle (100 ml)
Moisten cloth with this fluid and wipe the scanner
clean. (*1)
24 sheets per pack (*1)(*2)
Standard Cleaning Cycle