Fujitsu fi-6140 Operator's Manual page 33

2.4 Scanning Documents
fi-6140 / fi-6240 Image Scanner Operator's Guide
2.4 Scanning Documents
This section describes how to scan documents using this scanner.
The basic steps for scanning documents are as follows:
1. Load the document on the scanner's ADF paper chute or Flatbed.
For details on how to load documents, see Sections
Documents on the Flatbed for
2. Launch an application you want to use for scanning.
(The following shows an example screen when ScandAll PRO is selected.)
3. Select a scanner to use.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/02/c02_04_01.htm (1/3) [2008/10/30 12:41:36]
"2.2 Loading Documents on the ADF for
Scanning."
TROUBLESHOOTING
CONTENTS MAP
TOP
Scanning" and "2.3 Loading