Fujitsu fi-6140 Operator's Manual page 14

Safety Precautions (4)
fi-6140 / fi-6240 Image Scanner Operator's Guide
Safety Precautions (4)
CAUTION
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of electronic noise. Also,
protect the scanner against any static electricity, which can cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays can blow dirt and dust inside the
scanner, resulting in scanner failure or malfunction.
Avoid any contact when scanner is in use.
Avoid getting a sleeve, necktie, or hair caught up in any scanner mechanism during scanning since
this may cause injuries.
Disconnect the power plug from the power outlet when the scanner is
not used for a long period of time.
When the scanner is not going to be used for a long period of time, be sure to disconnect the power
plug from the power outlet.
Do not install the scanner in direct sunlight.
Do not install the scanner under direct sunlight or near heating apparatus. Doing so might cause
excessive heat to build up inside the scanner, which can cause scanner trouble or even fire. Install
the scanner in a well-ventilated location.
Before moving the scanner, make sure the transport lock is locked. (fi-
6240 only)
When moving the scanner, be sure to lock the transport lock in order to prevent damage to the
scanner.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/cReg/cReg04_04.htm [2008/10/30 12:43:27]
1 2
1 2
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
TROUBLESHOOTING
CONTENTS MAP
TOP
3
4
3
4