Fujitsu fi-6140 Operator's Manual page 161

6.3 Remedying Typical Troubles
fi-6140 / fi-6240 Image Scanner Operator's Guide
6.3 Remedying Typical Troubles
Symptom: Quality of scanned pictures or photos is not satisfactory when scanning in
black and white.
Back
Did you select halftoning or dithering?
Are the upper/lower glasses and rollers inside
the ADF or the document bed and document
holding pad of the Flatbed (fi-6240 only) clean?
If you cannot solve the problem after taking
measures, check the items in Section
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/06/c06_03/04.htm [2008/10/30 12:41:02]
YES
YES
"6.4
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
On the scanner driver, select "halftoning" or
"dithering" before scanning documents.
NO
Clean the dirty locations.
(For details on how to clean the dirty locations,
NO see Chapter "4 DAILY
TROUBLESHOOTING
CONTENTS MAP
TOP
CARE.")