Fujitsu fi-6140 Operator's Manual page 170

6.3 Remedying Typical Troubles
fi-6140 / fi-6240 Image Scanner Operator's Guide
6.3 Remedying Typical Troubles
Symptom: The scanned images are elongated when scanned from the ADF.
Back
Are the rollers dirty?
Is any of consumables (Pick rollers and Brake
rollers) worn out?
Have you adjusted the scan scale?
Check the items in Section
Check Before Contacting the Dealer Where
You Bought the Scanner" and contact the
dealer or an authorized FUJITSU scanner
service provider.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/06/c06_03/12.htm [2008/10/30 12:41:13]
YES
NO
YES
NO
YES
"6.4 Items to
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
Clean the dirty rollers.
(For how to clean the rollers, see Section
Cleaning the ADF.")
Check the consumables counters. Replace the
consumables, if needed.
(For how to replace the consumables, see
Chapter "5 REPLACING
Display the properties of the scanner that you
are using on "Scanners and Cameras" in the
control panel, then adjust the scan scale.
NO
TROUBLESHOOTING
CONTENTS MAP
TOP
"4.3
CONSUMABLES.")