Fujitsu fi-6140 Operator's Manual page 131

4.3 Cleaning the ADF
fi-6140 / fi-6240 Image Scanner Operator's Guide
4.3 Cleaning the ADF
As a Guideline, clean the ADF every 5,000 scanned sheets. Note that this guideline varies according to the type of
documents you scan. For example, it may be necessary to clean the ADF more frequently if documents are scanned when
the toner is not sufficiently fixed on the printout.
The glass surface of the ADF becomes hot during the operation of the scanner.
Before you start to clean the inner parts of the scanner, disconnect the AC adapter from the
power outlet, and wait at least 15 minutes to let the glass cool down.
1. Open the ADF by pushing on the ADF open lever and turning the ADF to the front.
CAUTION
Be careful, the ADF may close and pinch your finger.
2. Clean the following locations with a soft, dry cloth moistened with Cleaner F1.
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/04/c04_03_01.htm (1/4) [2008/10/30 12:43:14]
CAUTION
ADF open lever
TROUBLESHOOTING
CONTENTS MAP
TOP