Fujitsu fi-6140 Operator's Manual page 226

APPENDIX 1 Before Using the [Scan] or [Send to] Button
9. Click the [OK] button.
The window and operations may vary depending on your OS.
Settings to Configure on the Scanner
When using the [Scan] button
●
No setting is needed.
Pressing the [Send to] button starts up the application configured.
When using the [Send to] button
●
Press the [Function] button to switch the number displayed on the Function Number Display.
Use the same number assigned to the event configured on the computer (by selecting a number from 1 to 9 then
pressing the [Send to] button).
Pressing the [Send to] button starts up the application configured.
file:////10.232.227.50/Manual/fi-6140_6240C-Lyn...OG/R02/02_081030/contents/EN/App/cApdx01_01.htm (3/3) [2008/10/30 12:43:06]
HINT
HINT
To perform the event configured with "Send to 2", for example, display [2] on the
●
Function Number Display.
Each time the [Function] button is pressed, the number displayed changes as follows:
●
1, 2, 3, ...9, C, 1, 2, 3, ....
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
Function Number Display
[Function] button
[Secd to] button
[Scan] button