Performing A Control Solution Test - Fora V12 Owner's Manual

Performing a Control Solution Test

STEP 1. Insert Test Strip
Fully insert test strip, face up with control bars end
first, into test slot. The meter will turn on automatically
and display the followings in sequence:
→ CH" and "
date and time.
STEP 2. Press the M Button
While the " " symbol appears on
the display, press the M button so that
"CTL" will appear on the display. With
the "CTL" sign on the display, the meter
will not store your test result in memory.
If you decide not to perform a control
solution test, press the M button again,
and the "CTL" sign will disappear.
˙ Contact bars must be inserted all the way into the meter or you may
receive inaccurate test result.
˙ Every time you perform a control solution test, you must enter into the
"CTL" test mode so that the test result will not be stored in the meter
memory. Failure to do so will cause confusion between the blood glu-
cose test result and the control solution test result in system memory.
" → a flashing symbol "
WARNING
" with
23