Before Use; Setting The Meter And Deleting The Memory - Fora V12 Owner's Manual

BEFORE USE

Setting the Meter and Deleting the Memory

Your meter comes with the time, date, memory deletion, voice vol-
ume and language preset. If you need to set these parameters,
please follow below steps.
Start with the meter off. Then press the set button located in
the battery compartment. The meter is now in the setting
mode.
STEP 1. Set the Year
After pressing the set button, the year, a blinking
number, will be shown on the screen firstly.
Press and release the M button to plus one
year. You can also keep pushing down the M
button to proceed faster. When the correct
year is displayed on the screen, press the
set button and then a flashing number, which
stands for the month, is shown.
STEP 2. Set the Month
Press and release the M button until you see
the correct month. To move faster, keep push-
ing the M button down. When the desired
month is displayed, press the set button and
the date will flash.
17