Fora V12 Owner's Manual page 19

STEP 7. Select Speaking Function
The meter displays "VOL", "
M button to select speaking volume from 0 to 7. Then press
the set button to proceed to the next step.
Number 0 indicates that the speaking function is turned off. "
on LCD during testing. Numbers 1 to 7 indicates speaking volume from low to
high. At this time "
STEP 8. Select Language
L1/L2 and " " display on LCD. Press the M button to
select one of the two languages.
Set-up is completed. Press the set button to turn off the
meter. "OFF" will be displayed before shut down.
˙The time, date, memory deletion, voice volume and languages can ONLY be
changed in the setting mode. Therefore, when you perform a glucose testing,
those parameters are not possible to be changed.
˙Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages which you can
access from the meter memory. These averages are calculated from results
obtained during the 7-, 14-, 21-, 28-, 60- and 90-day preceding the current date
and time settings. When the date and time are changed, the 7-, 14-, 21-, 28-,
60- and 90-day averages may change.
˙While the meter is in the setting mode, it will turn off automatically without any
action in three minutes.
" and flashing number. Press
" will be displayed on LCD during test.
NOTE
" will not display
19