Before You Begin; Important Information; Intended Use - Fora MD Control Operator's Manual

BEFORE YOU BEGIN

Important Information

 Severe dehydration and excessive water loss may cause
readings which are lower than actual values.
 Use only fresh blood samples to test patient's blood glucose.
Using other substances will lead to inaccurate results.
 We do not recommend using this product on severely
hypotensive individuals or patients who are in shock. Readings
which are lower than actual values may occur for individuals in a
hyperglycemic-hyperosmolar state, with or without ketosis.
Before you start, there are a few important things to remember.
Before performing patient tests, please read this Operator's Manual
carefully.
The FORA MD Control Blood Glucose Monitoring System must be
properly set up (configured) before performing patient or quality
control tests. Configurations can be set up on the meter or through
MD Control Management System according to each facility's
requirements.
You should always wear gloves and follow your facility's infection
control procedures when handling blood-contaminated items. If you
need help when using the meter or during the testing, please read
this manual carefully. If you still have a question, please
customer service for assistance.

Intended Use

This system is intended for use in the quantitative determination of
1
contact local