DFI G5M300-P User Manual page 75

3.1.3.13 Init Display First
This field is used to select whether to initialize the onboard VGA,
AGP or PCI first when the system boots.
Onboard/AGP When the system boots, it will first initialize the
PCI Slot
3.1.3.14 On-Chip VGA
This field is used to enable or disable the onboard VGA.
3.1.3.15 On-Chip Frame Buffer Size
This field is used to select the frame buffer size.
3.1.3.16 Boot Display
This field is used to select the type of display to use when the
system boots.
EFP
CRT
LFP
CRT+LFP
3.1.3.17 Panel Scaling
This options are Auto, On and Off.
onboard VGA or AGP.
When the system boots, it will first initialize PCI.
Select this option if you want the system to boot the
EFP display.
Select this option if you want the system to boot the
CRT display.
Select this option if you want the system to boot the
LCD flat panel display.
Select this option if you want the system to boot
both the CRT and LCD flat panel display.
3
BIOS Setup
7 5