DFI G5M300-P User Manual page 80

3
BIOS Setup
Serial ATA Port0 Mode and Serial ATA Port1 Mode
These fields are used to select the master/slave mode of the
Serial ATA drives. Make sure they do not conflict with the set-
tings of the IDE hard drives.
3.1.4.2 Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
USB Controller
This field is used to enable or disable the USB ports.
USB 2.0 Controller
If you are using USB 2.0, this field must be set to Enabled.
USB Keyboard Support
If you are using a USB keyboard under DOS, set this field to
Enabled.
8 0