Jumper Settings - DFI G5M300-P User Manual

2.4 Jumper Settings

2.4.1 Clear CMOS Data
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP10 pins 2 and 3 to On. Wait for a few seconds and set
JP10 back to its default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Hardware Installation
3
JP10
2
1
1-2 On: Normal
(default) Clear CMOS Data
2
3
2
1
2-3 On:
23