Universal Serial Bus Connectors - DFI G5M300-P User Manual

2
Hardware Installation

2.5.7 Universal Serial Bus Connectors

The system board supports 4 onboard USB 2.0/1.1 ports (Black) at
locations CN5 and CN6 for USB 1-2 and USB 3-4 respectively.
USB allows data exchange between your computer and a wide
range of simultaneously accessible external Plug and Play peripherals.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the USB device. Refer to your operating system's manual or
documentation for more information.
If you are using a USB 2.0 device, install the "Intel USB 2.0 Drivers".
Refer to chapter 4 for more information.
42
USB 4
USB 3
USB 2
USB 1