DFI G5M300-P User Manual page 47

2
Hardware Installation
2.6.2 S/PDIF-out Connector
SPDIF out
Key
GND
+5V
1 4
The S/PDIF-out connector is used to connect an external S/PDIF-out
por t. Your S/PDIF-out port may be mounted on a card-edge
bracket. Install the card-edge bracket to the system chassis then
connect the audio cable connector to SPDIF1. Make sure pin 1 of
the audio cable connector is aligned with pin 1 of SPDIF1.
47