DFI G5M300-P User Manual page 37

2
Hardware Installation
Jumper Setting
If the serial device connected to COM 2 and/or COM 4 requires
auxiliar y power from the system board, set JP4 and/or JP7
appropriately. Refer to "COM 2 RS232/AUX Select" and "COM 4
RS232/RS485/AUX Select" in this chapter for more information.
BIOS Setting
Configure the serial ports in the Integrated Peripherals submenu
("Super IO Device" section) of the BIOS. Refer to chapter 3 for
more information.
37