DFI G5M300-P User Manual page 40

2
Hardware Installation
2.5.5 IEEE 1394
1394_2
1 0
1394_1 1 2
9
The system board is equipped with an onboard IEEE 1394 port at
location CN6 (IEEE 1394_2) of the system board.
It is also equipped with an IEEE 1394 connector at location 1394_1
for connecting an additional 1394 device. The 1394 port may come
mounted on a card-edge bracket. Install the card-edge bracket to
the system chassis then insert the connector that is attached to the
1394 port cable to 1394_1. Make sure pin 1 of the cable connec-
tor is aligned with pin 1 of the 1394_1. You can now connect an
IEEE 1394 device to the port.
40