Section 7-Troubleshooting - Invacare GET-U-UP LIFT Maintenance Manual

SECTION 7—TROUBLESHOOTING
SECTION 7—TROUBLESHOOTING
SYMPTOMS
Stand up lift feels loose.
Casters/brakes noisy or stiff.
Noisy or dry sound from pivots.
Lift arms will not lower in uppermost position.
NOTE: If problems are not remedied by the suggested means, please contact your dealer or Invacare.
™
Get-U-Up Lift
FAULTS
Mast/base joint loose.
Tie-rods are loose.
Fluff or debris in bearings.
Needs lubrication.
Lift arms require a minimum weight
load to lower from the uppermost
position.
24
SOLUTION
Tighten the bolt, washer and locknut that secure the
mast to the base.
Refer to Assembling the Patient Lift on page 10.
Refer to Hydraulic Pump on page 25.
Refer to Hydraulic Pump on page 25.
Pull down slightly on the lift arms.
Part No 1148115