Polycom VMC 1000 Getting Started Manual page 3

Safety Instructions
EU – CE statement:
This VMC 1000 is marked with the CE mark. This mark indicates compliance with EC Directives
2006/95/ED and 2004/108/EC. A full copy of the Declaration of Conformity can be obtained from
Polycom Ltd., 270 Bath Road, Slough, Berkshire, SL1 4DX.
Japan - Class A ITE statement
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules
Plug acts as Disconnect Device
The socket outlet to which this apparatus is connected must be installed near the equipment and must
always be readily accessible
Lithium cell installation
UL60950-1
1.7.13 replaceable batteries
Polycom, Inc.
CAUTION: Danger of Explosion if Battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
iii