2-6.6 Atx Power Supply Connector; 2-6.7 Ps/2 Mouse And Ps/2 Keyboard - SOLTEK SL-75LIV User Manual

2-6.6 ATX Power Supply Connector

• This connector connects to an ATX power supply. The plug from the power
supply should only be inserted to ATX Power connector in a specific
orientation. Find the proper orientation and push it down firmly to make
sure that all pins are aligned.
• Your power supply should support at least 10mA on the 5V standby voltage.
It may cause difficulty to turn on the system power if the power supply
does not support the load.
• For Wake On LAN function, the power supply should support at least
720mA current.
+5V Standby
Power Good

2-6.7 PS/2 Mouse And PS/2 Keyboard

PIN 6 : None
PIN 5 : Mouse Clock
PIN 4 : Vcc
PIN 3 : GND
PIN 2 : None
PIN 1 : Mouse Data
PS/2 MOUSE
+12V
GND
VCC
GND
VCC
GND
VCC3
VCC3
29
Chapter 2 Hardware Setup
VCC
VCC
-5V
GND
GND
GND
Power Supply on
GND
-12V
VCC3
PIN 6 : None
PIN 5 : Keyboard Clock
PIN 4 : Vcc
PIN 3 : GND
PIN 2 : None
PIN 1 : Keyboard Data
PS/2 KEYBOARD