Atx Power Supply Connector; Ps/2 Mouse And Ps/2 Keyboard - SOLTEK SL-65KVB User Manual

2-6-7 ATX POWER SUPPLY CONNECTOR

• This connector is connected to an ATX power supply by a plug from the
power supply. The plug can only be inserted in a specific orientation be-
cause of the different hole sizes. Find the proper orientation and push down
the plug firmly to make sure that all pins are aligned.
• Your power supply should support at least 10mA on the 5V standby voltage.
There may be difficulty to turn on the system power if the power supply
does not support the load.
• For Wake On LAN function, the power supply should support at least
720mA current.
+5V Standby
Power Good

2-6-8 PS/2 MOUSE AND PS/2 KEYBOARD

PIN 6 : Void
PIN 5 : Mouse Clock
PIN 4 : Vcc
PIN 3 : GND
PIN 2 : Void
PIN 1 : Mouse Data
PS/2 MOUSE
+12V
GND
VCC
GND
VCC
GND
VCC3
VCC3
Chapter2 Hardware Setup
VCC
VCC
-5V
GND
GND
GND
Power Supply on
GND
-12V
VCC3
PIN 6 : Void
PIN 5 : Keyboard Clock
PIN 4 : Vcc
PIN 3 : GND
PIN 2 : Void
PIN 1 : Keyboard Data
PS/2 KEYBOARD
33