SOLTEK SL-75LIV User Manual page 76

V1.0
Table of Contents

Advertisement

75LIV
PNP OS Installed Select Yes if the system operating environment is
NOTE:
BIOS will automatically disable all PnP resources except the boot
device card when you select Yes on Non-PnP operating system.
Reset Configuration
Resource Controlled
IRQ Resources Press Enter. Please refer to the list below:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
IRQ-3
assigned to
IRQ-4
assigned to
IRQ-5
assigned to
IRQ-7
assigned to
IRQ-9
assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Plug-and-Play aware (e.g., Windows95).
Normally, you leave this Disabled. Select Enabled
Data
to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
The Plug and Play AwardBIOS can automatically
By
configure all the boot and Plug and Play-compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the
BIOS automatically assigns them.
IRQ Resources
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
76
Item Help
Menu Level

Advertisement

Table of Contents
loading

Table of Contents