Placing Calls On Hold; Muting The Microphone - Inter-Tel USER GUIDE 8524 User Manual

P C
LACING ALLS
You can place calls on hold in one of two ways: individual or system.
•
Individual Hold places the call on hold at one endpoint. It can then be directly
picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see
•
System Hold places the call on hold in the system. You can then pick up the call
at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold.
NOTE:
You cannot place intercom calls on system hold.
To place a call on Individual Hold:
Press
1.
Press
2.
To place an outside call on System Hold:
Press
1.
Press
2.
To return to a call that is on hold:
Press
START
M T M
UTING HE
To mute the microphone so that you can hear the other party but they cannot
hear you (this does not put them on hold):
Press
1.
To return to the call, press
2.
®
Inter-Tel Model 8524/8525 User Guide
O H
N OLD
. The line number will flash.
HOLD
OR place another call.
END
and dial
START 3 3 5
OR place another call.
END
, , and the flashing line number.
LINE
ICROPHONE
and then .
FNC 1
FNC
page 28).
.
and then .
1
25