Placing Calls On Hold; Muting The Microphone - Inter-Tel INT2000 User Manual

PLACING CALLS ON HOLD

The first procedure places a call on individual hold, the second places it on
system hold. Individual hold places the call on hold at one phone. It can then
be directly picked up at that phone or it can be picked up at another phone
using the reverse transfer (call pick-up) feature. An outside call on system
hold can be picked up directly at any phone that shows a fluttering button for
the call, including the phone that placed it on hold. (Intercom calls cannot be
placed on system hold.)
To place a call on Individual Hold:
1. Press the HOLD button.
2. Hang up OR place another call.
3. To return to the call, press the HOLD button again.
To place an outside call on System Hold:
1. Press the SPCL button and dial
2. Hang up OR place another call.
3. To return to a call on system hold at any phone with a fluttering button,
lift the Handset and press the fluttering button.

MUTING THE MICROPHONE

To mute the microphone so that you can hear the other party but they cannot
hear you (this does not put them on hold):
Press the MUTE button. Your phone will remain muted until you press
the button again, even if you hang up and place another call. While the
phone is muted, the TALK icon in the display flashes.
Inter-Tel INT2000 User Guide
.
3 3 5
17