Model 8524/8525 Endpoints Vs; Traditional Two-Line Display Endpoints - Inter-Tel USER GUIDE 8524 User Manual

M 8524/8525 E
ODEL
T T
RADITIONAL
The Model 8524 and 8525 is designed to emulate an Inter-Tel two-line display end-
point. Some users may want to use both the Model 8524/8525 endpoint and a two-line
display endpoint. The following are the differences between the Model 8524/8525
and two-line display endpoints:
•
The extension name and the time and date that normally appear on the display
endpoint when it is in idle mode will not appear on the display of the Model
8524/8525. When the Model 8524/8525 is idle, it is actually in standby mode. In
other words, the endpoint is not receiving a signal from the system. The exten-
sion that shows on the display is programmed directly into the endpoint. This
conserves battery power on the endpoint.
•
The dash (-) that shows in the extension is there because of the way the endpoint
is programmed to deal with 7- and 10-digit numbers. As soon as 5 digits are
entered it puts in one dash. Once 8 digits are entered, it puts in a second dash.
•
The Model 8524/8525 endpoint does not support the Japanese language feature.
The following table lists the button assignments for the two-line display endpoints,
and the corresponding button assignments for the Model 8524/8525. Note that
L1 =
LINE
BUTTON DISPLAY ENDPOINT
1 Call 1
2 Call 2
3 Call 3
4 Call 4
5 IC (Intercom)
6 Programmable Button 1:
Do-Not-Disturb
7 Programmable Button 2:
Undefined
8 Programmable Button 3:
Undefined
9 Programmable Button 4:
Undefined
10 Programmable Button 5:
Undefined
*This applies to two-line display endpoints only.
14
NDPOINTS VS
-L D
WO INE ISPLAY
, and F1 =
1 FNC 1
8524/8525 BUTTON
L1
L2
L3
L4
L5
L6
L7
L8
L9
F3
.
E
NDPOINTS
.
DISPLAY ENDPOINT
11 Programmable Button 6:
Undefined
12 Programmable Button 7:
CNF
13 Programmable Button 8:
HOLD
14 Programmable Button 9:
TRANSFER
15 Programmable Button 10:
SYS SPD
16 Programmable Button 11:
REDIAL
26 FWD
30 SPKR*
31 MSG
32 MUTE
Inter-Tel
8524/8525
F4
F5
HOLD
F8
F9
F7
F2
START
F6
F1
®
Model 8524/8525 User Guide