Forwarding Calls; Manual Call Forwarding - Inter-Tel USER GUIDE 8524 User Manual

.F
ORWARDING
With the Forwarding feature, you can have calls follow you (e.g., forwarded to a cell
phone), or you can redirect calls to a voice mail or other extension.

Manual Call Forwarding

Manual call forwarding allows you to send incoming calls to another extension num-
ber. You can even forward calls to outside numbers, if your endpoint is programmed
to allow this.
To forward calls:
Press
1.
feature codes:
•
3
out ringing at your endpoint.
•
3
they are not answered before a timer expires.
NOTE:
tor can.
•
3
calls are forwarded without ringing at your endpoint.
•
3
warded if your endpoint is busy or if you do not answer, as described above.
Do one of the following:
2.
• To forward to an outside telephone number: Press
outgoing line and dial a telephone number.
• To forward to an extension number: Dial the extension number.
• To forward to your message center: Press
END
To cancel any call forward request:
Press
START
®
Inter-Tel Model 8524/8525 User Guide
C
ALLS
, and dial
START FNC
(Call Forward All Calls): All incoming calls are forwarded with-
5 5
(Call Forward If No Answer): All incoming calls are forwarded if
5 6
You cannot adjust this timer. Only the installer or System Administra-
(Call Forward If Busy): When your endpoint is busy, all incoming
5 7
(Call Forward If No Answer or Busy): All incoming calls are for-
5 8
to hang up.
, and dial , then
FNC 2
, or press and dial one of the following
2 START
FNC
.
# >
and select an
LINE
and dial . Then press
6
29