Inter-Tel 8526 User Manual page 67

To store a number in a Speed-Dial location:
Press
1.
Dial the location code 0-9 to be programmed.
2.
Enter the desired name for the speed-dial number to be programmed, as
3.
described below:
• Alphanumeric mode: Press the dialpad buttons to enter the desired charac-
ters. (Refer to the chart on
determines which character is entered. For example, 533266 would enter
"JEAN." When adjoining characters are located under the same button, press
FNC
66
the letters printed on dialpad buttons 1-9.) Press
space. Press the Backspace button (e.g.,
space.
NOTE:
ture buttons on your endpoint to use the Backspace button (feature code 314).
Refer to
how to program the backspace button.
• Press
Dial the extension number or telephone number to be stored.
4.
• Numeric mode: Press
the desired numbers.
NOTE:
change the mode to the alphanumeric mode by pressing
enter the special character. Press
necessary, press the Backspace button (e.g.,
make corrections.
• Press
NOTE:
To dial outside telephone numbers without first selecting an outgoing line, enter
a line access code (such as the Outgoing Call code "8") at the beginning of the outside
telephone number.
®
Inter-Tel Model 8524/8525/8526 User Guide
and dial
START 3 8 3
o n c e t o a d v a n c e t o t h e n e x t c h a r a c t e r. F o r e x a m p l e ,
2
6667776 would enter "NORM." (Note that letters correspond to
FNC 2
To use the Backspace button, you must pre-program one of the fea-
page 59, Programming You Feature Buttons section for details on
to save the name.
# >
FNC
If your number includes an asterisk, pound, hookflash, or pause,
to save the number.
# >
.
page 63.) The number of times a button is pressed
FNC
and then press the dialpad buttons to dial
6
to move to the next space. If
FNC 2
FNC
twice to leave a
FNC 2
) if you need to back-
3
and then
FNC 6
) to backspace and
3
55