Advertisement
To redirect a ringing call to another extension or to an outside number:
Press
1.
Enter the extension or outside number to which you want to redirect the call. See
2.
page 28
If the Off-Hook Voice Announce feature is enabled for your endpoint, when you hear
a single tone and see an incoming call display, you can do one of the following:
•
To accept the call on the speakerphone without ending your current call:
When you hear a double tone, you may talk handsfree with the caller through the
speakerphone. (The caller on the handset will be able to hear both you and the
party on the speakerphone.)
•
To block the call from coming through the speaker:
— Press
flashes, and the call is placed on hold.
— Press
for more information about DND mode.)
Outside Calls
With outside calls, you can talk to people who aren't members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1.
With or without the handset lifted, press
Dial the desired number.
2.
NOTE:
dial an account code before you can place your call (see
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the
ton:
•
Dial the Outgoing Call feature code (default is 8).
•
Press an unlit
•
Dial a Select Line Group feature code (the defaults are 92001-92208 but may dif-
fer depending on the software version).
•
Dial the Automatic Route Selection (ARS) feature code (the default is 92000 but
may differ depending on the software version).
®
Inter-Tel
Model 8520 User Guide
.
and dial
3
3
1
for more information.
to allow the incoming intercom call to camp on. The
to place your endpoint in DND mode, if desired. (See
DND
If you see a request for an account code and hear a single beep, you must
button, if you have one.
CALL
.
OUTGOING
page
64).
button
IC
page 42
but-
OUTGOING
21
Advertisement
